User and maintenance manual Winch 1111 HL
–
Mod.A
Synthetic GREASE Harken - BK4513
Apply a film of grease with a brush to all the parts indicated, and
make sure that the film is visible. Take special care when greasing the
teeth of the ring gears, the gears and the roller bearings.
It is important to keep the teeth of the ring gears of our winches
greased to increase their efficiency and life.
WARNING!
Parts, and especially the gears of the winch that are not
sufficiently greased will undergo irreversible wear that is
not covered by the warranty.
Anti-corrosive lubricants (i.e. TEFGEL
®
or similar)
Apply sacrificial anodes or anti corrosive lubricants to prevent
electrolytic corrosion between different metals in contact with one
another.
NOTE! Apply the anti-corrosive lubricant with a brush on
clean surfaces.
Anti-seizing (i.e. SAF-T-EZE
®
or TEFGEL or similar)
This product is used to prevent problems of seizing caused by
oxidation. We recommend using this or similar products on stainless
steel screws where the use of Loctite is not specifically requested.
NOTE! Apply the anti-seize with a brush.
Light oil (Vaseline oil or McLube One drop
®
)
This product is used to lubricate balls and plastic roller bearings.
WARNING!
Do not use Vaseline oil on the pawls
