User and maintenance manual Winch 1111 HL
–
Mod.A
13.1 Winch positioning
NOTE!
Install the winch bearing in mind that the final pinion should be placed,
relative to the point where the first turn of the rope touches the drum, so that
the tangent to this point and the direction in which the load is applied forms
an angle of between 0° and 30°, if this is compatible with the space available
below deck.
NOTE!
For the rope positioning, see the ‘Use’ chapter of this manual
After correctly positioning the final pinion with respect to the load, check that the motor,
gearing, electrical wiring or hydraulic pipes can be housed below decks.
Once you have decided on the correct placing of the winch on the deck and checked the space
available below deck, proceed with the installation procedure steps, making reference to the
mounting template.
VIEW FROM ABOVE
