Hardy Floor Scales
34
above for hole dimensions) Insert anchor
bolts with the nut and washer already
attached.
Step 4.
Tap the anchor bolts into the hole then
tighten the nuts securely.
Step 5.
Repeat this process for each plate used in
your installation.
NOTE:
If ramps are NOT installed and foot retainer plates
are needed, then a set of four (4) foot retainer plates
are required.
OPTIONAL BUMPER
GUARDS
Bumper guards are designed to help protect the plat-
form from direct hits from forklift traffic. The guards
are slightly higher than the scale and will help deflect
the forks.
Installing Bumper
Guards
Step 1.
Place the bumper guard so it will protect
the platform from non-scale traffic and not
touch or interfere with the platform’s
movement. (See Figs. 28 & 29)
Summary of Contents for HIFS-3030-01-PS-T
