Hardy Process Solutions HIFS-3030-01-PS-T, Operation And Installation Manual

Page: 11 / 54

Hardy Floor Scales
1
INTRODUCTION
Hardy Floor Scales are designed for applications that
require a low profile weighing surface with high com-
mercial accuracy and reliability. These durable wash-
down scales can be used in hazardous areas with the
appropriate barriers. The Hardy Floor Scales can be
configured with a complete range of accessories. Rug-
ged Hardy Floor Scales are rated for 250,000 load
cycles under normal loading conditions.* They can be
sized or configured to fit any floor scale application.
*Contact Hardy for more information
The typical platform height is 3.375 inches (8.6 cm).
Each corner can be adjusted an additional .275”
(7mm) to compensate for a non-level floor or pit
mounting surface.
Hardy Floor Scales do not have bearings, levels or
moving parts that can be damaged or wear out. The
active elements of the floor scales are four precision
Hardy load sensors, mounted in all four corners of the
scale platform with an integrated HI 6011 junction
box. The unique Blind Hole Load Introduction tech-
nology allows the foot to move to compensate for
uneven floors. This ensures that the load forces are
always applied to the load sensor at precisely the
same point regardless of where the load is placed on
the scale. This ensures you will get accurate and
repeatable weighments.
Each platform load sensor is initially certified for use
in a C2
®
Second Generation Calibration system.
SPECIFICATIONS
Platform Material 0.25 inch painted carbon steel or stainless steel.
Platform Height 3.375 inches (8.6 cm) deck height adjustable
0.275” (7mm)
Rated Output 2.0mV/V ±0.1%
Capacities Available in eight sizes from 30 x 30 inch to 6 x 8 feet
in 1, 2.5, 5, and 10 thousand pound capacities