HARDKERNEL ODROID-XU4 User Manual Download Page 85

Page: 85 / 92

ODROID-XU4 USER MANUAL

setenv videoconfig “drm_kms_helper.edid_firmware=edid/1024x600.bin”

setenv vout “dvi”

Make sure that no other videoconfig or vout value is set. The rest of

the related settings should be commented out. Save these new set-

tings and shut the system down.

Reconnect the XU4 to the VU7 Plus display, with the touch in-

terface USB cable attached to the USB port on the XU4. Power up

the assembly and login to the desktop. The assembly will appear as

shown in the image below.

XU4 with VU7 Plus display

The VuShell can also be used with the VU7 Plus to create a

functional desktop computer.

Micro USB-DC Power Bridge

When the XU4 is under heavy stress, its power requirements can

increase sharply. As a result, the power supplied to the VU7/VU7-Plus

displays can drop, which could lead to a flickering display. To ensure

Summary of Contents for ODROID-XU4





























































































Search results

Summary of Contents for ODROID-XU4

Reviews:

Related manuals for ODROID-XU4

Brands by name

Popular brands

HARDKERNEL ODROID-XU4, User Manual

Search results

Summary of Contents for ODROID-XU4

Reviews:

Related manuals for ODROID-XU4

Brands by name

Popular brands