HARDKERNEL ODROID-XU4 User Manual Download Page 63

Page: 63 / 92

ODROID-XU4 USER MANUAL

Additional details, such as burning new firmware for the SHOW,

along with sample applications, may be found at

http://bit.ly/

1toe7Pl

. One important aspect of the SHOW2 board, is the presence

of a Data Terminal Ready (DTR) reset jumper/switch. Its role is im-

portant during burning of new firmware. The following precautions

need to to be followed, regarding the DTR jumper:

• It must be installed when you upload the firmware, and

• It must NOT be installed during normal usage mode.

Weather Board

The Weather board is an add-on developed by Hardkernel that

may be used with either the SHOW2 or a 16x2 LCD device. Follow

the following steps to get the Weather board to work with the SHOW2

and the ODROID-XU4.

First, power down the XU4. Attach the Weather board to the

SHOW2 as described in the wiki at

http://bit.ly/1IG1LvF

. Then, at-

tach the assembly using the USB cable to the XU4. Turn on the power

to the XU4. The link above also lists the steps necessary to install the

Arduino-compatible firmware for displaying the temperature, humidity,

pressure, light levels, and altitude on the SHOW2.

Next, install Hardkernel’s Ubuntu sample application for display-

ing the same information in the QT-based user-interface on the XU4:

$ sudo apt-get install qt4-default qt4-designer libqwt-dev

$ export GIT_SSL_NO_VERIFY=1

$ git clone https://github.com/hardkernel/ODROID-SHOW

$ cd ODROID-SHOW/qt_weather

$ uic weather_board.ui > ui_weather_board.h

$ qmake

$ make

$ sudo ./WEATHER_BOARD

Weather board on SHOW2 and monitor

Chapter 4

Summary of Contents for ODROID-XU4





























































































Search results

Summary of Contents for ODROID-XU4

Reviews:

Related manuals for ODROID-XU4

Brands by name

Popular brands

HARDKERNEL ODROID-XU4, User Manual

Search results

Summary of Contents for ODROID-XU4

Reviews:

Related manuals for ODROID-XU4

Brands by name

Popular brands