Harbor Freight Tools Central Machinery Industrial 95302, Assembly And Operation Instructions Manual

Page: 19 / 32

Page 19 SKU 95302
for technical questions, please call 1-800-444-3353.
COOLANT PUMP
TOGGLE SWITCH
(750-5)
MOTOr
TOGGLE
SWITCH
(750-5)
COOLANT PUMP
fITTING
(91S)
CyLINDEr
(216)
SAW HEAD
ASSEMBLy
fIGUrE Q
Turn the Cylinder (216) to its “ON” position, and slowly lower the Saw Head until
the Saw Blade (251) is just above the workpiece cut line.
(See figure Q.)
Turn the Coolant Pump Fitting (91S) to its
“OPEN” position. Then, turn the Coolant
Pump Toggle Switch (750-5) to its
“ON” position. (See figure Q.)
Turn the Motor Toggle Switch (750-5) to its
“ON” position. (See figure Q.)
Before cutting, turn on the Bandsaw and check for excessively loose Saw Blade
(251) tension or machine vibration. If this is found, turn off the Bandsaw and correct
the problem before using.
(See figure Q.)
Allow the Saw Blade (251) to turn up to full speed before feeding the Saw Blade
into the workpiece.
(See figure Q.)
WArNING! Always keep hands and fingers safely away from the cut-
ting area.
Allow the Saw Arm to automatically lower on its own, while it gradually feeds the
Saw Blade (251) into the workpiece. Do not force the Bandsaw to remove material
faster than it is designed to cut.
NOTE: The speed at which the Saw Arm moves
downward may be increased or decreased by adjusting the valve on the Cylinder
(216).
(See figure Q.)
7.
8.
9.
10.
11.
12.
13.