Harbor Freight Tools Central Machinery Industrial 95302, Assembly And Operation Instructions Manual

Page: 11 / 32

Page 11 SKU 95302
for technical questions, please call 1-800-444-3353.
To Attach The Hand rod:
Align the four mounting holes in the Hand Rod (98-1) with the four mounting holes
in the left side of the Stand (77S). Insert four Hex Head Screws (98-2), with four
Washers (98-3), through the mounting holes in the Hand Rod and Stand. Then
secure the Hand Rod to the Stand with four Washers (98-3) and four Hex Nuts (98-
4).
(See Assy. Diagram, page 30.)
To Attach The Stock Stop rod And Block:
Slide the Stock Stop Rod (40) into the mounting hole in the Swivel Base (1), and
secure the Stock Stop Rod by tightening the Hex Head Screw (39).
(See Assy. Diagram, page 30.)
Slide the Stop Block (41) onto the Stock Stop Rod (40), and secure by tightening
the Thumb Screw (38).
(See Assy. Diagram, page 30.)
1.
2.
OPErATING INSTrUCTIONS
CAUTION! Always make sure the Toggle Switch (750-5) for the Bandsaw and
the Toggle Switch (750-5) for the Coolant Pump are both in their
“Off” positions
and the tool is unplugged from its electrical outlet prior to making adjustments to
the tool.
Selecting Proper Blade Speeds:
Material Speed (feet Per Minute)
Tool Steel
135 Stainless Steel
Alloy Steel
Cast Iron Steel
Low-Alloy Carbon Steel
197
Soft Brass
Soft Iron
Aluminum
256
Plastic
fIGUrE E
When using the Bandsaw always change the blade speed to best suit the material
being cut. The Blade Speed Chart illustrates several settings for several types of
materials.
(See figure E.)
1.