13
FINAL INSTRUCTIONS
Lowes.com/harborbreeze
10. Connect the fobs (DD) to the appropriated pull chains.
Assembly is now complete.
10
DD
Hardware Used
x 2
DD
Fob
Lift the glass shade (N) up to the light kit (L), allowing
the preassembled threaded rod and pull chain to go
through the hole in the bottom of the glass shade (N).
While holding the glass shade (N), guide the threaded
rod and pull chain through the appropriate holes on the
light finial cap (O). Secure it with light finial (P).
9.
9
L
N
O
P
8.
Align the cutout on the light kit (L) with the reverse
switch on the bottom housing (R). Attach the light kit (L)
to the motor housing (G) using the three set screws
previously removed (step 6, page 12). Tighten securely,
then install bulbs (M) into each socket.
CAUTION:
If you replace bulbs with over 190 watts, the
fixture will automatically turn off. When replacing bulbs,
ensure bulb wattage is below 190 watts.
L
M
G
Screw
8
