Remove finial (N), finial plate (M) and threaded
washer (T) from threaded rod and save for later use.
6.
Connect male plug from motor housing (E) to female
plug from light kit fitter (L), matching up the colors on
the male plug with the colors on the female plug for
correct fit. Make sure plugs are connected
completely. Align holes in switch housing at top of
light kit fitter (L) with holes in switch housing plate
(F). Secure light kit fitter (L) with three screws
previously removed. Tighten all screws securely.
5.
Align center hole in the glass shade (H) with
threaded rod, allowing pull chains to come through
corresponding holes in glass shade (H). Push up
gently on glass shade (H) until threaded rod comes
through hole. Secure glass shade (H) with threaded
washer previously removed.
NOTE:
Do NOT overtighten threaded washer (T) as
glass may crack or break.
Thread pull chains through appropriate holes in finial
plate (M) and push up on finial plate (M), allowing
threaded rod to come through hole in middle of finial
plate (M). Thread pull chain in middle through hole in
finial (N) and re-attach finial (N).
NOTE:
Do NOT overtighten finial (N) as glass may
crack or break.
7.
Female
Plug
Male
Plug
Switch
Housing
Threaded
Rod
FINAL INSTALLATION
5
L
F
E
IU
6
L
N
M
IT
7
L
N
M
IT
13
Lowes.com/harborbreeze
H
Threaded
Rod
