FAN MOUNTING
9
Lowes.com/harborbreeze
WIRING
Install ball end of downrod (A) into mounting
bracket (C) opening. Align slot in ball with tab in
mounting bracket (C).
DANGER:
Failure to align slot in ball with tab
may cause the fan to wobble or fall, which could
result in serious injury or death.
6.
If you decided to cut back the lead wires in Step 4,
strip a 1/2 in. of insulation from end of white wire.
Twist stripped ends of each strand of wire within
the insulation with pliers (not included). Repeat
Step 5 for black, blue (if applicable) and green
wires.
5.
5
Hanging
Ball Slot
Tab
6
A
C
WARNING
: To reduce the risk of fire, electrical shock or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12-gauge or there is more than one house wire to connect to
the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION
: Be sure outlet box is properly grounded and a ground (green or bare) wire is present.
WARNING
: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine wiring.
NOTE:
This fan is remote control adaptable (remote control not included). If you choose to purchase
a remote control for use with the fan, be advised that the dimming function for the light will not be
operable. Dimming capability for this light is only possible by using wall controls that control the fan
and light
separately
, such as the WM-7WWL (not included).
