Locate motor screws (Q) and lock washers (R)
removed in Step 5, page 7.
Insert two motor screws (Q) along with lock washers
(R) through one blade arm (I) to attach blade arm (I)
to motor. Tighten motor screws (Q) securely.
Repeat with remaining blade arms (I), making sure
to completely secure each blade arm (I) before
proceeding with the next.
3.
4. Remove three screws from outer edge of switch
housing plate (F).
Partially loosen two screws in fitter plate on
underside of motor housing (E) and remove the
other screw. Align slotted holes in switch housing
plate (F) with loosened screws, allowing male plug
from motor housing (E) to come through hole in
switch housing plate (F). Twist switch housing plate
(F) to lock. Re-insert the screw that was removed
and securely tighten all three screws.
Partially insert three blade screws (AA) along with
three fiber blade washers (BB) to attach one blade
arm (I) to a blade (J). Then, tighten each blade
screw (AA) starting with the one in the middle.
Repeat with remaining blades (J).
2.
Blade Screw x 15
Fiber Blade Washer x 15
2
AA
BB
I
J
FINAL INSTALLATION
Hardware Used
AA
BB
3
J
II
R
Q
12
Lowes.com/harborbreeze
Fitter
Plate
Male
Plug
IU
IF
IV
IE
4
