FAN MOUNTING
11
Install hanging ball (K) on downrod (A) into
mounting bracket (C) opening. Align slot in hanging
ball (K) with tab in mounting bracket (C). (Fig. 8)
DANGER:
Failure to align slot in hanging ball
(K) with tab may result in serious injury or death.
8
Hanging
Ball Slot
Tab
A
C
NOTE:
Black wire is hot power for fan. Blue wire is
hot power for light kit. White wire is common for fan
and light kit. Green or bare wire is ground.
WIRING
NOTE:
Please refer to installation and operating
instructions for remote control.
WARNING:
To reduce the risk of fire,
electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only
one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12-gauge
or there is more than one house wire to connect to
the two fan lead wires, consult an electrician for the
proper size wire connectors to use.
CAUTION:
Be sure outlet box is properly
grounded and that a ground (green or bare) wire is
present.
WARNING:
If house wires are different colors
than referred to in the following steps, stop
immediately. A professional electrician is
recommended to determine wiring.
8.
K
