13
Fig. 2
2.
Partially insert three blade screws (BB), along with
three blade washers (DD), to attach one blade arm
(H) to a blade (I). Then, tighten each blade screw
(BB) starting with the one in the middle. (Fig. 2)
Repeat with remaining blades (I).
Fig. 4
Fig. 3
Switch
Housing
4.
If you do NOT wish to use the light kit
,
proceed
to Step 10
to attach pull chain extension (J) for fan
and finalize installation
without
light kit.
If you wish to USE the light kit
, remove three
screws (along with star washers) from switch
housing and remove switch housing cap (F). Locate
BLUE
and
WHITE
wires in switch housing labeled
FOR LIGHT and remove plastic from these two
wires. (Fig. 4) Continue with Step 5.
3.
Insert two motor screws (AA), along with lock
washers (CC), through one blade arm (H) to attach
blade arm (H) to motor. Tighten motor screws (AA)
securely. (Fig. 3) Repeat with remaining blade arms
(H), making sure to completely secure each blade arm
(H) before proceeding with the next.
BB
H
I
DD
H
E
AA
CC
E
F
DD
BB
FINAL INSTALLATION
Hardware Used
3/16 Blade Screw x 15
Blade Washer x 15
Hardware Used
Screw and
Star Washer
CC
AA
Motor Screw x 10
5.4 M/M Lock Washer x 10
