12
1.
Lift canopy (B) to mounting bracket (C), aligning
slotted holes in canopy (B) with loosened canopy
mounting screws (FF) in mounting bracket (C). Twist
canopy (B) to lock. Re-insert the two screws (FF) that
were removed in Step 4 on page 7 and tighten all
screws (FF) securely. (Fig. 1)
Fig. 1
FF
FF
B
A
FINAL INSTALLATION
FF
1
2
3
Fig. 3
Dimmer
Switch
Speed
Switch
For illustrative purposes only
--
not
intended to cover all types of controls
2.
Wrap electrical tape around each individual
wire connector (EE) down to the wire as
shown in Fig. 2.
WARNING:
Make sure no bare wire
or wire strands are visible after making
connections. Place green and white
connections on opposite side of box from the
black and blue (if applicable) connections.
Turn spliced/taped wires upward and gently
push wires and wire connectors (EE) into
outlet box.
IMPORTANT
: Using a full range dimmer
switch to control fan speed will cause a loud
humming noise from fan. To reduce the risk
of fire or electric shock, do NOT use a full
range dimmer switch to control fan speed.
(Fig. 3)
EE
WIRING
Hardware Used
E 3 Wire Connector x 4
Canopy Mounting Screw x 4
Hardware Used
Fig. 2
EE
EE
EE
