HARBEN CENTURY, Service Manual

Page: 34 / 83

Flowplant Century Pump Manual
3.1 INTRODUCTION
This section gives general information on safety, protective clothing to be used by operators,
and general starting and stopping procedures when the pump is incorporated in a machine. It
should be remembered that the operating procedures given are to be used as a guide only,
and the equipment handbook operating procedures should be used where applicable.
3.2 SAFETY CODE OF PRACTICE
BASIC RULES
1. ALWAYS WEAR THE CORRECT PROTECTIVE CLOTHING.
2. ALWAYS ENSURE ALL EQUIPMENT IS IN A FIRST CLASS CONDITION.
3. NEVER WORK FROM A LADDER.
4. NEVER USE THE GUN WITH THE TRIGGER LOCKED ON.
NEVER POINT THE GUN AT ANYONE, EVEN IF SWITCHED OFF.
This Code of Practice is intended to provide guidance on the safe operation of high pressure
water jetting equipment.
The term 'high pressure water jetting' covers all water jetting, including the use of additives
and abrasives, where there is an energy input to increase the pressure of water.
This code applies to high pressure water jetting as defined above where there is a
foreseeable risk of injury.
31