-SJ -18
Frame move
Selection the way of frame movement and
Move frame.
Frame change
Change the frame to be used.
Design centering
Move design to the center of frame.
Center
Moves the embroidery frame to the center auto-
matically.
Frame out
Move frame to the front position which was set
before.
Press
(Position) to return the frame to the
original position before frame out position.
It is convenience if hand work is required in the
middle of embroider process.
3_9b N401
3-5
DRIVE MODE
Needle change
Change the needle bar directly to the indicated
needle number on the button.
Change
Move the sewing head to the adjacent needle in
the direction of the arrows.
Pointer
Turn on and off the laser pointer.
Laser pointer is located at right side of needle
no.1.(Needle no.0 position).
When laser pointer is turned on, moving head
moves to needle no.0 position and radiates.
Pressure foot
You can raise or lower the presser foot .
Jump (Off)
The machine can embroider.
Jump (On)
Machine becomes jump and the machine
doesn't
embroider.
i-Custom 22-1
You can place frequently used display and key icons freely on the right side of Drive mode screen.
Pressure foot
You can raise or lower the presser foot .
Position
When sewing is interrupted in the middle of a
design, this returns the frame to current sewing
position regardless of where frame may have
been moved with the arrow keys after interrupt.
Original point return
This returns the frame to *pattern origin point.
After performing this action once, repeating this
again will cause the frame to return to the
previous
position.
Origin registration
Register the current frame position as origin.
Trace
When pressed while at the beginning of design,
the embroidery frame moves following the outer
edge of the design. This allows you to compare
the design size and position against the frame
before sewing.
Indicate target design on LCD panel when non-
showingdesign.
If you press this key and hold, re-display your
target design.
