-SJ -18
3_A N401
3-
7
DRIVE MODE
Speed setting by needle (ON state)
Embroidery speed can be set by needle.
If speed by needle exceeds the speed set at Drive speed setting, the value of speed turns gray
and speed by the needle is applied to the speed set at Drive speed setting.
You can be set up taking the following steps.
1. Press
.
2. Press
.
3. Change the setting on the needle number
you would like to change with
.
Press
when returning the setting on all the
needle numbers to maximum.
4. Press
.
The screen returns to Drive mode.
Speed setting by needle
Drive speed setting 3-4
