Happy Industrial Corporation HCH series Page 20 Original Instructions Manual Download

Page: 20 / 211

-RA -23

3_9d O512

3-6a

DRIVE MODE

Fast move (OFF state)

Press the button to turn "ON" state.

Fast move (ON state)

Press this key one time to move the frame faster
toward the direction of the arrow.
Press the button to turn "OFF" state.

Fast move speed setting (High)

Fast move speed setting (Middle)

Fast move speed setting (Low)

The speed of "Fast move" can be adjusted.

Pointer (Option)

Turn on and off the laser pointer.

X Direction frame move

YDirection frame move

The frame can be moved with specified distance
along X axis or Y axis. (Unit: mm)
The function allows you to move the frame
precisely with a pitch of 0.1mm.

Select the number, and press

The frame will move specified distance.

Changing is cancelled.

Numbers are deleted.

Quick move

First press this key and then the arrow key to
move the frame toward the edge of the embroi-
dery area in the direction of the arrow.

Quick embroidery design data position

move

First press this key and then the arrow key to
move the frame where the design data can be
embroidered at
the edge in the direction of the arrow.

Frame move key

The frame moves toward direction of the arrow
mark.

You can move the
embroidery frame by
pressing desired
position on the
screen.

Summary of Contents for HCH series




















































































































































































































Search results

Summary of Contents for HCH series

Reviews:

Related manuals for HCH series

Brands by name

Popular brands

Happy Industrial Corporation HCH series, Original Instructions Manual

Search results

Summary of Contents for HCH series

Reviews:

Related manuals for HCH series

Brands by name

Popular brands