-SJ -45
7-B
CAP FRAME (OPTION)
7_B NB01
Embroidery
area
There is a case that the upper part of the cap cannot
be embroidered satisfactory depending on shape of a
cap.
We recommend to change design position or reducing
size of the design.
Refer to the instruction book of "Happy Link" to
reduce the size of the design.
Embroi-
dery area
:Original point (Start point)
Embroidery area (Max. *1)
180mm (Normal cap frame)
360mm (Wide cap frame)
You can confirm the outline
and position of design.
Starting to embroider
1. Press
and move the frame to the
original point of pattern data by
.
2. Press
.
After the moving head moves to the left end,
the laser pointerwill turn on.
* The actual embroidery
area will be restricted by
the design and shape of
a cap.
CAUTION: To prevent accidents.
The moving head will move.
Please keep hands clear for your safety.
Forward only when pressing
Pose
Backward only when pressing
Pressure
foot
When you Press
, the frame will start
moving for the design trace. 10-4
Make sure that the pressure foot and needle
does not touch the frame.
When you Press
, the machine will stop.
Go on to step 4 if you want to start embroidering
without tracing first.
3. Press
, the design trace fineished.
The cap frame will return to the original point.
67mm (Normal cap frame)
95mm (Wide cap frame)
