Happy Industrial Corporation HCH series Page 21 Original Instructions Manual Download

Page: 21 / 211

-SJ -20

3_9d NB01

3-7

DRIVE MODE

Speed setting by needle (ON state)

Embroidery speed can be set by needle.

If speed by needle exceeds the speed set at Drive speed setting, the value of speed turns gray

and speed by the needle is applied to the speed set at Drive speed setting.

You can be set up taking the following steps.

1. Press

2. Press

3. Change the setting on the needle number

you would like to change with

Press

when returning the setting on all the

needle numbers to maximum.

4. Press

The screen returns to Drive mode.

Speed setting by needle

Drive speed setting 3-9

Summary of Contents for HCH series




















































































































































































































Search results

Summary of Contents for HCH series

Reviews:

Related manuals for HCH series

Brands by name

Popular brands

Happy Industrial Corporation HCH series, Original Instructions Manual

Search results

Summary of Contents for HCH series

Reviews:

Related manuals for HCH series

Brands by name

Popular brands