-D2 -58
8-2
ADJUSTING THE LASER POINTER (OPTION)
8_2 M717
1. For switch ON laser pointer, Press
and Press
on the submenu.
For switch OFF laser pointer, Press
.
2. Press
to return to Drive mode, and
press
and set a position of moving
head to needle No. 1.
3. Set fabric on the frame, then put white
paper to the position of needle and fix by
Scotch tape.
4. Press
and Press
.
5. Press
.
6. Press
to cancel "Jump".
7. Press
and keep until needle reachs to
the paper and make hole.
Laser pointer indicates the needle position.
The beam of laser is coming from right upper side, thus the position of laser pointer can be
changed depending on the height of surface of fabric.
Please adjust the angle of laser pointer depending on thickness of fabric and type of frame.
CAUTION: To prevent accidents.
The needle will penetrate the fabric.
Please keep your hands clear for your safety.
CAUTION: Laser beam (Class 1)
Do not stare into the beam.