-D2 -134
20-7
FRAME CONFIRMATION
20_7 M717
1. When the machine is stopped, press
.
2. Select "FRAME".
3. Select
"User-defined frames".
4. Select desired size of frame and press
.
The embroidery area appear in red.
User-defined frames (1 ~ 5)
The embroidery area of each registered frame is set to the inside of the frame edge for pressure
foot clearance. (Fig. 1, 2)
The embroidery area of each registered frame is set to the inside of the frame edge for
pressure foot clearance. (Fig. 1, 2)
When you use square frame as shown in fig.3, pressure foot may hit the corner of frame.
In this case you need to create frame as special shape under the frame No.6 - 20.
Fig. 1
Embroidery area
Round frame
Embroidery area
Square frame
Fig. 3
Fig. 2
Embroidery area
Inner size (Sidewise)
Inner size
Inner size
(lengthwise)
