Happy Industrial Corporation HCD2, Instruction Book, Page: 131 / 207

-S2 -34
7. Press .
Enter offset of Y direction from base line
(edge of pocket) to pattern.
Enter “15.0”(15mm) in this case.
8. Press .
Enter offset of X direction from base line
(edge of pocket) to pattern.
Leave “0.0” when pattern is aligned to the center
of base line (width of pocket).
9. Press .
10.Press .
Angle and position of embroidery are automati-
cally set.
15-3
POSITION ALIGNMENT BY DEFINING 2 POINTS
15_3 N122
P1
P2
Offset
Base line
Offset
P1
P2
Complete