-D2
2-4b M201-9
2-4b
SETTING UP THE MACHINE
Assemble Wide X-carriage
(Option)
Wide X-carriage is packed separately from
machine.
When you set machine up, please install Wide
X-carriage on machine.
1. Move Stay at middle of Y-carriage.
2. Put Wide X-Carriage on Stay and adjust
screw hole position.
3. Fix Carriage by Flat head screw (M4x8) at
hole position [1] and [2](for the purpose of
positioning).
4. [3][4] Fix Carriage by Fixing screw (Cap
M4x8, Spring washer, Plain washer) at hole
position [3] and [4].
5. Unscrew Flat head screw from [1] and [2]
and fix by Fixing screw (Cap M4x8, Spring
washer, Plain washer).
6. Loosen screws on BOX terminal and take
cover out.
7. Insert X-Motor cable into BOX terminal and
connect with X-Motor relay cable.
Fix terminal for earth connection for X-Motor
cable and X-Motor relay cable together.
8. Fix X-Motor cable by Cable clamp.
9. Close cover of BOX terminal.
Please be sure cables do not get caught by
cover.
Please reverse procedure when remove the
X-Carriage.
Wide X-carriage
X-Motor cable
1
2
Cable clamp
Terminal for earth connection
Stay (left)
Stay (right)
Stay (left)
Stay (right)
1
4
3
2
1
4
3
2
X-Motor relay cable
BOX terminal
Cover of
BOX
terminal
8
9
3
4 5
6 7
Front
