-D2 -116
1. Press
.
2. Confirm that there is indication of
(Top)
in the display and go on to procedure no. 3.
Press
"Top", if there is not a
indication.
Upper right indication of
will be shown.
3-A
3. Move the frame to the original point with the
.
If the frame is located at the origin point,
proceed to Step 3.
4. Press
.
5. Press
.
The origin point is registered and the display will
return to Drive mode.
17-2
LOCATE
17_2 M401
Entry
This registers the original point of the selected pattern.
