background image

 

 

Unless a dress guard is fitted, this appliance shall be installed with a hearth that projects at 
least 300 mm in front of the naked flame/incandescent fuel bed, extends at least 150 mm at 
either side, and around its periphery is a height of at least 50 mm above finished floor level. 

11.  Lead  the  hose  away  from  the  built-in  gas  fire  burner  kit  without  twisting  it.  Do  not  let  the 

hose touch the hot surface. 

12.  Never change the air valve settings of the burner. 
13.  Every time the gas connection is reconnected do a leak test. 
14.  Those parts sealed by the manufacturer or the agent must not be altered by the user. 
15.  Any modification of this built-in gas fire burner kit may be dangerous. 
16.  Do not move this built-in gas fire burner kit during use. 
17.  Turn off the gas supply at the cylinder or main shut off valve of city network gas after use. 
18.  Do not touch the logs or lava rocks until they cool down. 
19.  This appliance is intended for warming purposes. 
20.  This  appliance  has  a  naked  flame,  a  suitable  guard  should  be  used  for  the  protection  of 

young children,  the elderly and the infirm. IT DOES NOT GIVE FULL PROTECTION FOR 
YOUNG  CHILDREN  OR  THE  INFIRM.  It  is  advisable  to fit  the  dress  guard available  from 
the same dealer or qualified installer. Failure to fit this dress guard will result in a potential 
hazard  to  clothing  when  approaching  the  appliance.  The  dress  guard  is  not  supplied  with 
the  appliance,  the  installer  shall  inform  the  user  of  the  local  rules  in  force  and  advise  the 
fitting of the same dealer

’s or qualified installer’s dress guard. He shall also warn the user of 

the  hazard  caused  to  clothing  by  open  flames  if  the  dress  guard  is  not  fitted. 

Recommendation:

  for  any  additional  guard  that  may  be  required  for  the  protection  of 

young  children,  aged  or  infirm  persons.  The  minimum  distance  should  be  10mm  between 
the appliance to any ventilation grille. 

21. 

When  first  use,  preheat  the  lava  rocks  and  logs  for  15  minutes  to  burn  out  the impurities 
and air in the natural lava rocks and handmade logs.

 

22. 

To  change  the  gas  cylinder  in  an  amply  ventilated  area,  away  from  any  ignition  source 
(candle, cigarettes, other flame producing appliances).

 

23. 

This appliance must be installed and the gas cylinder stored in accordance with the national 
regulations in force.

 

24. 

Shut off the valve at the gas cylinder or the regulator before moving the appliance.

 

25. 

Use only the type of gas and the type of cylinder specified by the manufacturer.

 

 

13B

Contents 

 

14B

1.

 

Technical Data

 

15B

Page 3-3

 

16B

2. Instructions for assembly

 

17B

Page 4-14

 

18B

3. Installation and operation instructions 

 

19B

Page 15-19

 

20B

4. Maintenance

 

21B

Page 20-21

 

 

The  built-in  gas  fire  burner  kit  is  an  I3+(28-30/37),  I3  B/P(30),  I3  B/P(50),  I2L(G25)  & 
I2H/I2E/I2E+(G20)  appliance,  designed  to  operate  on  Butane  at  28/30mbar,  Propane  37mbar, 
B/P  30/50mbar,  I2L  at  25mbar  &  I2H/I2E/I2E+  at  20mbar.  Gas  consumption,  pressures  and 
injectors orifices sizes are shown below: 

 

Summary of Contents for 4001BIS/I2 Plus





















Reviews: