8
ASSEMBLY INSTRUCTIONS
GAS HOSE CONNECTIONS
SR2201BI, SRR2201BI & SR4001BIS, SR4001BIR: Attach the hose to the manifold inlet nipple
and tighten hose clip
,
or secure the hose to the manifold inlet fitting as shown in FIG.01 &
FIG.02 below.
SR2, SRR2 & SR40, SR40: Attach the hose to the manifold
inlet fitting with a national standard NG connector and secure the hose to the manifold inlet
fitting as shown in FIG.03 below.
NOTE:
Installation and service must be performed by a
qualified installer, service agency or your gas provider.
FIG.01
FIG.02
FIG.03
