Two post hydraulic lift HAPP 95
© 2013 HAPP Australia Pty Ltd
Version 9
Page
6
1 Safety
1.1 Introduction
Thoroughly read this manual before operating the lift and comply with the instructions. Always
display the manual in a conspicuous location.
Personal injury and property damage incurred due to non-compliance with these safety
instructions are not covered by the product liability regulations.
1.2 Symbols
Failure to comply with instructions could result in personal injury
Failure to comply with instructions could result in property damage
Important information
1.3 Intended Use
The lift is designed for the safe lifting of automotive vehicles and forbidding to park vehicles.
Observe the rated load capacity and load distribution of the lift.
HAPP 95
Load capacity
Load distribution
Front: Rear
Minimum
Maximum
3000kg
2:3
3:2
In principle, the lift is designed for both
approach directions.
For a long service life, we recommend to use
the short support arms for engaging the engine
side of the vehicle.
1.4 Safety Instructions for Commissioning
The lift may be installed and commissioned by authorized service personnel only.
