EN
(102)
Haojue UF115 99011H5A001H000 V02 ES+EN+FR 2021-4-8 10:00
B
WARNING
After a new brake disc or pad is installed, do not
ride immediately but grasp and release the brake
handles or the brake pedal several times to make
the brake discs and pads fully fit with each other,
restore to their normal holding forces and have the
brake fluid circulate stably.
B
WARNING
After a new brake disc or pad is installed, the
braking distance may be a little longer than the
original value.
After the brake discs and brake
pads have realized full break-in following a mileage
of about 300 km, the best braking effect will be
realized.
Make sure there is an enough braking
distance when riding before that.
B
WARNING
Fail to inspect and maintain the brakes pads or
brake disc, and replace them when recommended
can increase your chance of having an accident.
If you need to replace brake disc or brake pads,
have your Haojue dealer do these works. Inspect
and maintain the brake disc and brake pads as
recommended.
FRONT BRAKE (DRUM BRAKE)
Adjustment of front brake lever
Free stroke
2
of the brake handle refers to the stroke
between the free position of the brake handle and the
position of the brake handle when it is grasped to make
the front wheel begin to brake.
When adjusting the free stroke
2
of the brake handle,
remove the rubber bush
1
along the cable and turn the
adjusting nut
5
on the front brake. When doing a fine
adjustment, loosen the nut
3
, adjust the screw
4
, and
operate the front brake handle to make the free stroke
2
3–5 mm. After the adjustment, lock the nut
3
and fit the
rubber bush
1
.
NOTE: If follow the steps, the free stoke is not required,
please have it checked by the authorized dealer.
(102)
Haojue UF115 99011H5A001H000 V02 ES+EN+FR 2021-4-8 10:00
41
