(40)
Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
Models with a half-cased chain
Models with an all-cased chain
10–20mm
1. Support the motorcycle with the
main stand.
2. Loosen the rear axle nut
4
.
3. If the motorcycle equipped with
an all-cased type, dismantle the chain manhole cover
5
or the lower chain case
6
. It is convenient to check
the looseness of the chain.
4. Loosen the lock nut
2
on the adjustor
1
.
5. Move the adjuster
1
horizontally to make the chain
slack for 10–20mm. Make the front and rear chain
wheels on a single straight line by making sure of the
left-right consistency of the sign positions
3
of the
rear wheel fork and the left and right adjusters
1
.
6. After adjusting the tightness of the transmission chain,
tighten the rear axle nut
4
and the lock nut
2
and
then reconfirm the tightness of the transmission chain.
7. If the motorcycle equipped with an all-cased type,
mount the chain cover
5
or the lower chain case
6
.
B
CAUTION
The drive chain of this motorcycle is made
of special materials carefully processed.
Use
authentic parts (428 102 links) when replacing
the drive chain.
Using parts with different
specifications may cause early damage to the
chain.
NOTE: Each time when replacing the drive chain, please
check the abrasion conditions of both the front and
rear sprockets, replace sprockets at the same time if
necessary.
NOTE: When installing drive chain,
make sure the opening direction of
lock ring is the opposite direction of
the chain movement.
NOTE: After adjusting the drive chain, ensure that you
have checked the free stroke of the rear brake pedal.
Refer to “BRAKES” section in this manual.
BRAKES
The front wheel of motorcycle uses a hydraulic disc
brake and rear wheel uses a drum brake. Correct brake
operation is very important for safe riding. Be sure to
have the brake system checked regularly. This inspection
(40)
Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
39
