(44)
Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
B
WARNING
The tire pressures and surfaces are significant. If
they are neglected, the safety of the rider may be
endangered and the motorcycle may be damaged.
B
WARNING
Please inspect the internal pressures and surfaces
of the tires of the motorcycle frequently.
Tire surface status
There are serial “T.W.I.
;
” marks
1
(tire wear indicator) in the edge of
the tire. Check the bulge stock
2
of
T.W.I. in the tread near the mark. If
the tire wears off to reach the bulge
stock, the tire should be replaced.
Check the damage
3
(punctures or fractures) on the tire
surface visually. As surface damage may impede driving
stability, such tires should be replaced.
B
WARNING
Replace a tire when worn to the specified limit, or if
find damage such as cuts or cracks.
Tire specification
When replacing a tire, make sure the new tire condition
is same as described in this manual.
Tires with
different specifications may affect driving stability of the
motorcycle.
B
WARNING
Tire standard applicable to the motorcycle:
Front wheel:
2.50-17 4PR
Rear wheel:
80/90-16 48P
B
WARNING
Using tires other than the standard tires might
create problems. We sincerely recommend you to
select standard tires.
LIGHT AND SIGNAL
The check of lighting and signal consult the content of the
“inspection before riding” section.
Front brake switch
The front brake switch is located on
the front brake lever. The brake light
will light, when you grasp the lever
and feel a little pressure.
Rear brake switch
The rear brake switch is located
under the right side cover. You only
need to turn the nut to move it higher
or lower to adjust this switch. When
you step on the brake pedal and feel
a little pressure, the brake light will light up.
(44)
Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
43
