Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
(35)
Carefully turn the spark plug by hand into the threads until
it is finger tight. If the spark plug is new, tighten it with a
wrench about 1/2 turn past finger tight. If you are reusing
the old spark plug, tighten it with a wrench about 1/8 turn
past finger tight.
NOTE: Insert the plug cap completely.
B
CAUTION
The standard spark plug for application on the
motorcycle of this model is carefully chosen and
can be used in most of operating conditions. If
the actual color differs from the normal spark
plug color, please consult with a distribution and
maintenance organization about it before replacing
the present spark plug with another with a different
heat value. If an improper spark plug is used, the
engine will be seriously damaged.
If a spark plug of another brand is used, there could
possibly be serious consequences. Thus, you are
expected to consult with one of our maintenance
units before doing so.
ENGINE OIL AND OIL STRAINER
Long engine life depends much on the selection of quality
oil and periodic changing of the oil. Daily oil level checks
and periodic changes are two of the most important
maintenance items to be performed.
Oil level check
(A)UPPER LEVEL (B)LOWER LEVEL
Inspect the engine oil level following the steps below.
1. Stop the engine and support it on a flat ground with
the help of the main stand.
2. Start the engine and have it run for several minutes.
3. After the engine has been stopped for several minutes.
4. Remove the engine oil dipstick, wipe it, insert it into
the engine oil without turning it and then take it out to
check the engine oil level. The engine oil level should
be between the UPPER LEVEL and LOWER LEVEL
on the engine oil dipstick.
B
CAUTION
If the engine oil level is lower than the LOWER
LEVEL on the engine oil dipstick, do not start
the engine. When adding engine oil makes sure
the engine oil level is not higher than the UPPER
LEVEL.
34
Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27
(35)
