overview
8_
overview
AT A GLANCE
Appearance
Item
Description
a
Main cover
Protects the internal PTZ mechanism from the direct sunlight, rain or external impact.
b
Windshield wiper
Used for wiping off raindrops or snow dripping on the window.
J
Do not adjust the wiper manually by hand. After power is turned on, booting will be
completed and the wiper will move to its default position.
c
Shield cover
Shield cover for the lens and unit protection.
d
Micro SD Card cover
The Micro SD card slot and reset button are located inside and can be opened using Torx
drivers, etc.
Inside
Item
Description
a
IR LED
These infrared LED’s are controlled by the illumination sensor.
b
Lens
Lens for the camera.
c
Illumination Sensor
Detects incoming light to control the IR LED.
d
Reset button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
e
Micro SD Card slot
Compartment for the Micro SD card.
d
a
c
b
d
e
b
a
c
