English _
11
!
OVER
VIEW
Removing a Micro SD card
Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD
card from the slot.
J
`
Before removing the Micro SD card, in <
Setup (
)
>-<
Event
>-<
Storage
>, set the device to <
Off
> and press the [
Apply
]
button and turn the camera off.
`
If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.
Preparing & Installing Camera Mount
For installation guidelines for mounts, refer to the installation manual that is enclosed with the mount.
M
`
See “
Optional Accessories for Installation
” for the appearance of each mount (unbundled). (page 7)
Getting ready for network cable installation
1.
Remove the cable bushing.
2.
Pull off the extruded part of the removed cable bushing.
3.
Use the cap installer to route the network cable through the cable bushing.
M
`
If the cable bushing is torn, use the extra cable bushing provided.
