installation & connection
14_
installation & connection
Installing using ceiling or parapet mount
1.
Hang the safety wire of the mount on the safety wire hook of the product.
Safety wire hook
Safety wire
2.
Connect the network cable to the network port.
3.
Plug the cable bushing of the network cable in the hole.
When plugging it in, press the whole bushing area evenly so that it is properly plugged in.
J
`
The length and width of the cable bushing are different. Check the shape and plug it in the right direction.
4.
Install the bushing clip.
Let the arrow mark on the clip point in the direction of the safety wire hook, and click each side into place
one at a time.