installation & connection
14_
installation & connection
2-4.
Connect the network cable jack to the PoE port of the camera body.
[Installing network/power cables]
3-1.
Pull off the extruded parts of the cable bushing to be used.
3-2.
Route the network cable through the big hole of the cable bushing and connect to the network cable
connector.
3-3.
(When using the power) Route the power cable through the small hole of the cable bushing and connect
it to the provided terminal block.
3-4.
Mount the cable bushing to the camera body.
[Installing audio/alarm cables]
4.
Pull out the cable bushings from the camera body.
Summary of Contents for TNV-C7013RC
Page 1: ...NETWORK CAMERA User Manual TNV C7013RC...
Page 30: ......