Hanwha Techwin Wisenet XRN-6410RB2-24TB User Manual Download Page 22

Page: 22 / 124

22_

live

Changing Overall Channel Aspect Ratio

Video screen ratio for all channels can be changed in live split screen mode.
Click <

> at the bottom of the screen. It changes to the actual proportion of the video.

Click <

> to return to the previous aspect ratio.

￭

You can change the aspect ratio of each channel. For more information, refer to the "

Live

Camera Video Control

Change Channel Aspect

Ratio

" page in the Table of Contents.

full Screen Mode

You can change to full screen mode, which has no top/bottom/left/right areas of the live screen.
Click < > at the bottom of the screen.

Changes to full screen mode.

￭

To exit full screen, place your mouse cursor over the bottom of the full screen mode and click <

general mode

full screen mode

Summary of Contents for Wisenet XRN-6410RB2-24TB





























































































































Search results

Summary of Contents for Wisenet XRN-6410RB2-24TB

Reviews:

Related manuals for Wisenet XRN-6410RB2-24TB

Brands by name

Popular brands

Hanwha Techwin Wisenet XRN-6410RB2-24TB, User Manual

Search results

Summary of Contents for Wisenet XRN-6410RB2-24TB

Reviews:

Related manuals for Wisenet XRN-6410RB2-24TB

Brands by name

Popular brands