Hanwha Techwin Wisenet PRN-4011 User Manual Download Page 32

Page: 32 / 88

channel Setting

You can configure the video settings for each channel.

menu > device > camera > channel Setup

•

Apply to CH : If you select <

apply to cH

>, the "

apply to cH

" confirmation window will appear.

After selecting channels that the settings will be applied to, click on <

> to apply them to the selected

channels.

•

Video

- <

on/off

> : You can turn ON/OFF the selected channel's camera. If the camera video is turned off, a

blank screen is displayed.

- <

covert1

> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

- <

covert2

> : Shows nothing but an empty screen while the recording continues.

If the channel is set to <

Covert1

> or <

Covert2

> mode, the channel's sound is not hearable.

However, the channel's sound is recorded if its Audio setting is set to <

>, even the sound is not heard in Live mode.

•

Audio

- If set to <

>, you can turn the audio of the channel ON/OFF on the Live screen.

- If set to <

off

>, the channel's audio is off on the Live screen and not recorded.

•

Camera Name : Provide a camera Name. You can enter up to 15 letters including spaces.

live Setting

You can change the live transfer settings of the network camera.

menu > device > camera > live Setup

•

CH : Click <

> to display the channel information table.

•

Live Replacement : You can select the live profile setup mode.

If you select <

manual

>, the profile setup items are enabled, and you can change settings manually.

- Auto: For the profile for live monitoring, a profile optimized for each split mode is displayed, along with the

live4nvr

' profile automatically generated at the time of the camera registration.

Live4NVR profile default: H.264 800 x 600 30 fps

- Manual : Live monitoring is performed with the profile selected by the user from the registered camera

profiles.

- Recording : Live monitoring is performed with the profile set for recording.

•

Profile : You can set the camera profile.

•

Codec : Show the codec of the selected recording profile.

•

Resolution : Show the resolution of the selected profile.

•

Frame Rate : Show the frame rate of the selected profile.

32_

menu setup

Summary of Contents for Wisenet PRN-4011

























































































Search results

Summary of Contents for Wisenet PRN-4011

Reviews:

Related manuals for Wisenet PRN-4011

Brands by name

Popular brands

Hanwha Techwin Wisenet PRN-4011, User Manual

Search results

Summary of Contents for Wisenet PRN-4011

Reviews:

Related manuals for Wisenet PRN-4011

Brands by name

Popular brands