Single Port KVM over IP
For related tools you may have a look at
www.fdos.org
4.2.4.1.2
CD ROM/ISO Images
UNIX and UNIX-like OS
To create an image file, make use of “dd”. This is one of the original UNIX
utilities and is included in every UNIX-like OS (UNIX, Sun Solaris, and
Linux).
To create a CDROM image file, copy the contents of the CDROM to a file.
You can use the following command:
dd [ if=/dev/cdrom ] [ of=/tmp/cdrom.image ]
dd reads the entire disc from the device /dev/cdrom, and saves the
output in the specified output file /tmp/cdrom.image. Adjust both
parameters exactly to your needs (input device etc.).
MS Windows
To create the image file, use your favorite CD imaging tool. Copy the whole
contents of the disc into one single image file on your hard disk.
For example, with “Nero” you choose “Copy and Backup”. Then, navigate
to the “Copy Disc” section. Select the CD ROM or DVD drive you would like
to create an image from. Specify the filename of the image, and save the
CD ROM content in that file.
Figure 4-13 Nero selection dialog
61 / 109
