19
-
68
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
Spider
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d
’
alimentation
Index
3.3.2 Examples of installation in milking parlour
Figure 15: Leg recognition
to determine the position of the antenna, consider the position of the animal
and where the transponder will be situated. Ensure that the animal's tran-
sponder is within the boundaries of the antenna.
Figure 16
-
17: Ear recognition
Use the mounting kit (art. no.: 007
-
533
-
000) for installation to the MultiFrame
(40°
-
50° & 60°
-
70°). Cut the ends off the wire bracket so they do not stick out.
Because the animals all have their ear transponders on the same side, the an-
tenna must be installed on wall on the other side of the milking parlour. The
cable can be run through the side by breaking off the tab on the antenna (fig.
19).
Note: Ear recognition is not an option for a 30° MultiFrame. A partition is always required for MultiFrame
installations which will be fitted with Spider ear recognition. Contact us for a fitting solution.
Figure 18: Neck recognition
A mounting bracket (art. no.: 007
-
525
-
000) is available for installing neck recognition.
15
16
17
18
19