36
-
68
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
Spider
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d
’
alimentation
Index
Motor error:
If there is a problem with a motor (overcurrent, no feedback), a notification will be displayed.
1:
No feedback
2:
Overcurrent
If the motor is actuated 3x in a row with an overcurrent, it will be disabled for 10 minutes. This notification can be discard-
ed. If you receive this notification frequently, contact your dealer.
Antenna error:
Antenna error (no cennection)
-
Spider PCB –Antenna Ant
(…)
No signal from the indidcated antenna. It may not be connected, or there may be a break in the cable.
Antenna error (short circuit)
-
Spider PCB—Antenna Ant
(…)
The indicated antenna is short
-
circuiting. The shield and the core are in contact somewhere. Check the cable.
Auto notifications:
The status of a motor and/or valve can be modified. A permanent notification will be displayed because of a deviation from
the automatic setting.
Silo notifications:
If silo management is used, the system can be set to display a notification when the silo level drops below the set value. The
example below shows a notification for Silo 4.
Problem animals:
This notification is displayed when an animal has not been in the feeding station for a certain period or is not eating
enough. The set value is only displayed here as a reminder.
Other notifications:
Search for notifications
By clicking on the magnifying glass in every report, all notifications that are currently displayed are displayed.
Alerts:
The overview page also includes the alerts menu, which contains a history of notifications.
For possible causes and solutions of these reports, see chapter 12 (FAQ).
