9
-
68
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
Spider
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d
’
alimentation
Index
3. Installation Hardware
General comment:
The Spider is Hanskamp's feeding computer for automatically dispensing concentrate to
individual animals in the milking parlour or feeding station. It is great for any dairy farmer
interested in automated and economical feeding, regardless of company size. One of the
Spider's perks is that, in most cases, it will work with transponders you already have.
The
Spider's user interface is logical, this makes the Spider easy to control from your PC, smart
phone, or tablet. The SpiderServer establishes its own WiFi network, providing access to
the built
-
in web server and allowing you to quickly and easily adjust concentrate portions
for individual animals or groups, monitor problem animals,
This instruction will help you to install the Spider (figure 1). Read this instruction carefully
and follow the safety instruction. Examples of installation can be found at
www.hanskamp.nl/en .
Order numbers and names of accessories can be found in the attachment
1 & 2
.
Transport and storage:
Spider will be shipped in a sealed box. The box is completely sealed with tape and there is
protective foil inside the box to prevent damage. The Spider is also stored this way.
Please note!
Always move the box carefully!
Please note!
When opening the packaging, parts may
fall out. Make sure the packaging is always facing up upon opening.
Please note
,
When opening the packaging beware of damage and loose and
protruding parts that could cause injury.
Safety stickers:
The user and installer are solely responsible for the safe operation and maintenance of
the Spider. Safety stickers are used to ensure safety in and around the Spider. These stic-
kers must be placed correctly. There is one safety sticker applicable to Spider. This sticker
must be placed on the right or left side of the unit.
Applying the stickers:
•
Make sure the surface is dry and clean.
•
Make sure the surface temperature is at least 5°C.
•
Find the right position for the sticker.
•
Remove a small portion of the foil on the back.
•
Place the sticker on the surface and press a small portion of the
self
-
adhesive layer onto the surface.
•
Carefully remove the foil and press down the rest of the sticker.
•
Remove any air bubbles with a needle and use the foil to
smoothen the sticker.
The box contains:
1.
SpiderServer
005
-
100
-
000
2.
PowerUnit
002
-
812
-
000
3.
X number of antennas
005
-
150
-
000
Optional:
4. SpiderClient
005
-
115
-
000
Product
name
Product
specifications
Address
description
CE
marking
Type description;
can be found on the side of the enclosure
Figure 1: supply specifications
Figure 2: Product specifications
