12
4.2 Safety tips
Note:
Please strictly stick to the following steps for installation and debugging
The operation of connecting the gas cylinders can only start after turning
off the power switch of distribution box.
Warning
Electric shock
may injure
body or may be
fatal
Welding process may cause fire
or explosion
Spatter may ignite nearby
combustibles. Combustible
materials must be at least 10m
away from the arc, or else must
be covered over with approved
coverings
Avoid spatter falling on the
clothes or the body
Be sure turn off the power
switch of the power
distribution box when wiring
Do not touch the exposed
live parts
The fumes given off during
welding is harmful to health
Do not inhale any fumes or
noxious
Clean up the oil spill on the
workpiece
Keep air circulation of
welding site
Welding station should be
equipped with exhaust smoke
and dust cleaning equipment
Strong arc burns the eyes and
skin
The UV rays generated by arc
will damage skin and eyes, please
wear welding labor clothing when
welding
Overheated parts may
injure the skin
Do
not
touch
the
overheated welding position
Do not touch the welding
cable or welding clamp with
bare hands due to the welding
heat
High speed mobile content may
cause injury
Do not insert hands or fine
content into the fan cover
Please ensure the case has
been covered before opening a
welding power
To prevent eyes and skin injury, please follow
labor safety and health rules, wear the necessary
protective equipment
Operation should be in accordance with the
relevant work safety operating rules
