Washing process
Page EN-21
Cancelling/modifying a cycle
Vorwäsche
Start/Pause
3 Sek.
Tür Entriegelung
3 Sek. drücken für Individuell
Ein/Aus
Extra
Spülen
Startzeit-
vorwahl
Zeit sparen
(11)
(3)
1. Press the button (8) to cancel or modify
an active cycle.
The washing machine will switch off.
2. Press the button again to switch the
washing machine on again.
3. Use the cycle selector (2) to select any cy-
cle and then add detergent if required.
4. Start the new cycle with the button (9).
The suds will not be pumped away after
some cycle changes. To pump the suds
away after cycle change, see “Draining” on
page EN-23.
Cycle end
The appliance stops automatically as soon as
the selected cycle is finished.
7 signal tones will sound and the display (5)
will show E
nd
.
1. When the locking time ends, the symbol
will go out.
The appliance door will be released with a
click and you can remove the laundry.
2. Press the button (8) to switch the appli-
ance off.
3. Leave the appliance door open and pull
the dispensing drawer (1) out slightly to al-
low the inside of the appliance to dry.
4. Turn off the tap and remove the mains
plug from of the wall socket.
If no further settings are made, the device will
automatically switch off after 15 minutes.
The spin speed affects the noise emis-
sions of the appliance and the residual
dampness of the laundry. The higher
the spin speed, the higher the noise emissions
and the lower the residual dampness.
