Seite EN-31
Automatic control functions
Automatic control functions
The following functions run automatically. You
cannot change them.
Foam detection
The electronic foam detection makes sure
that more water is added to the first rinse cy-
cle for certain amounts of foam.
Overflow protection system
This system prevents the water from leaking
out over the dispensing drawer. As soon as
a certain water level is exceeded, the outlet
pump will automatically switch on.
Dynamic quantity control
If your washing machine is only half-loaded
or loaded with less laundry than the highest
capacity, the water consumption and cycle
duration reduce for certain cycles. This helps
you save energy.
Imbalance correction system
This system protects your washing machine
in the event of an imbalance that is too large
when spinning starts. This can happen with
small loads or with large individual pieces of
laundry. The laundry is distributed again and
the spin speed increased if the laundry distri-
bution is right.
