Page EN-24
Installation
Air outlet
Air outlet
– The appliance must be positioned in such
a way that the air outlet is not obstructed.
490 mm
560 mm
520 mm
590 mm
>50 mm
>50 mm
>50 mm
>50 mm
• Cut a recess in the worktop: 560 ×
490 mm (W × D).
If a hob was already installed, the recess cut
for it must have the same dimensions.
Installing the appliance
1. Take the appliance out of the packaging.
2. Remove all protective and packaging ma-
terials.
3. Place the appliance, with the sensor field
facing forward, into the worktop recess.
Align it evenly and press it firmly into
place.
A
B
A (thicker worktop)
B (thinner worktop)
4. Use the supplied retaining clamps to fix
the appliance in place to prevent it from
slipping. Depending on the thickness of
the worktop, you must rotate the retaining
clamps as illustrated above and tighten
them on the appliance from below.
5. Clean the appliance thoroughly before its
first use (see “Cleaning the appliance” on
page EN-21).
Summary of Contents for 887 942
Page 64: ......
