Page EN-36
Installation, connection and initial commissioning
Fixing with a hose holder
• Put the end of the water outlet hose (21)
over a hose holder and hang it over the
edge of a bath. You can find a hose hold-
er in a specialist shop or DIY store.
Attaching the discharge manifold to a
washbasin
• The water outlet hose (21) is mounted
onto a special device, which can be found
on the outlet manifold of a washbasin. In
doing so the lock on the siphon must be
removed.
Have this fixed by a specialist!
There is a washer in an unused con-
nection manifold to ensure that no
water can run out. This washer must be
replaced by a seal ring before connecting
the water outlet hose.
Water connection
~ 95 cm
~ 140 cm
~ 145 cm
~ 95 cm
0 – max. 80 cm
~ 95 cm
~ 150 cm
