Hanse VTC Series, Installation, Operation And Maintenance Instructions

Page: 18 / 91

Chamber Controls and
Instrumentation
Programmable Temperature Controller:
Product temperature, as well as air temperature are controlled by the unique, Watlow
F4 temperature controller.
Temperature Sensors:
Chamber and product temperatures are measured by type T thermocouples. Back up
air safety controller monitors a separate type T thermocouples.
Air Safety Controller:
The Watlow Series 97 temperature controller included monitors a Type T
thermocouples. Controller has two independent set points for monitoring high and low
temperature limits. These high and low temperature alarms are wired into the
chamber’s safety circuit.
Control Software:
HanseView Control allows for manual and profile control.
HanseView Analysis allows for manual and profile control as well as vibration analysis.
Vibration level Control:
A GRMS meter connected to an accelerometer provides instantaneous readout of
vibration intensity in one axis. Additional accelerometers can be purchased and
installed to provide multi-axis indication. Software included with the system allows
reading and control of g levels.
• True RMS Vibration Meter: for user-selectable over-g limit protection with
monitor and drive capability. Four inputs available with four outputs available.
Optional display available. Single display for control only.
• Miniature, Low Impedance, Voltage Mode Control Accelerometer: one (1) Dytran
model 3030B5, with a 3 meter. cable. This has 10-32 ends and comes with a
10-32 to BNC adapter.
• Current Source: for Control Accelerometer, one (1).
Authorization and Copyright of this document is
controlled by Hanse Environmental Inc.
18