HANSCRAFT TP 500, User Manual

Page: 8 / 24

8
Control panel
A B C D E F G H I J K
L
M
N
O
5 2 Detailed description of monitor
JETS This button is used for quick control of massage jets. If the filter is not
running, the JETS button must be pressed twice. The pressure of the
water flow through the jets can be adjusted by turning the nozzles to the
left or right. Therefore, if water is not flowing through the nozzle, it may
not be due to a malfunction, the nozzle may just be closed. Not all jets can
be controlled like this. It is also possible to regulate the pressure of the
massage with the massage engine running by turning the air intake valve
into the jets located at the top edge of the hot tub.
AUX The AUX button turns on the blower.
WARM The up arrow labeled WARM is used to increase the heating temperature.
In other menus it is used to scroll up when selecting options.
LIGHT Switches on the lights.
COOL The down arrow labeled COOL is used to lower the heating temperature.
In other menus it is used to scroll down when selecting options.
5.3 Entering the menu
To enter the menu, use the MENU button.
MENU
A heating
B prepared mode
C rest mode
D bba
TM
2 audio bluetooth
E wifi
F light
G cleaning cycle
H jets 1
I jets 2
J blower
K connection (jets 3
or MicroSilk)
L temperature range
(high/low)
M settings
N filter cycle
(1 or 2 or both)
O time (AM or PM)